Aksa Mobile Generator APD-EPAK13T4 (13kW)



Aksa Mobile Generator APD-EPAK13T4 (13kW)
Call for Price
The APD-EPAK13T4 is a Tier 4 Final, diesel-powered mobile generator set from Aksa Power Generation, built around a Kubota D1503-M-E4BG engine paired with a Stamford PI044G alternator. Delivering standby power up to 13.2 kW / 16.5 kVA and prime power up to 12.4 kW / 15.5 kVA at 60 Hz, this trailer-mounted unit is purpose-built for mobile and prime power applications. It combines a heavy-duty steel base frame, a sound-attenuated steel enclosure, and a non-proprietary DSE 7320 control system to deliver dependable, code-compliant power wherever it’s needed.
Key Features
- EPA Certified Tier 4 – Final Kubota D1503-M-E4BG diesel engine
- Standby rating up to 13.2 kW / 16.5 kVA; Prime rating up to 12.4 kW / 15.5 kVA at 60 Hz
- Stamford PI044G self-excited alternator with Class H insulation
- DSE 7320 control module – NFPA 110 Level 1 compatible, MODBUS communication
- 3-position Voltage Selector Switch: 480/277V & 208/120V three-phase, 240/120V single-phase
- Sound-Attenuated Steel Enclosure on a heavy-duty steel base frame
- DOT-approved 10,000 lb heavy-duty dual-axle trailer with spring axles and electric brakes
- Exhaust system with DOC + SCR emissions after-treatment
- 29.06-gallon integral double-wall fuel tank
- 1-Year / 2,000-hour limited warranty
APD-EPAK13T4 product details and specifications:
General Characteristics
- Model Name: APD-EPAK13T4
- Frequency: 60 Hz
- Fuel Type: Diesel
- Engine Make and Model: Kubota D1503-M-E4BG (Tier-4)
- Alternator Make and Model: Stamford PI044G
- Control Panel Model: DSE 7320
Power Ratings (60 Hz)
- 240/120V, 1-Phase, PF 1: Standby 12.6 kW / 12.6 kVA, 52.6 A — Prime 11.9 kW / 11.9 kVA, 49.4 A
- 208/120V, 3-Phase, PF 0.8: Standby 13.2 kW / 16.5 kVA, 45.9 A — Prime 12.4 kW / 15.5 kVA, 43.2 A
- 480/277V, 3-Phase, PF 0.8: Standby 13.2 kW / 16.5 kVA, 19.9 A — Prime 12.4 kW / 15.5 kVA, 18.7 A
Engine Specifications
- Engine: Kubota
- Engine Model: D1503-M-E4BG
- Number of Cylinders: 4 cylinders - in line
- Net stand-by power: 16.2 kW (21.7 HP) / 1800 rpm
- Net continuous power: 15.1 kW (20.2 HP) / 1800 rpm
- Aspiration & Cooling: Naturally Aspirated
- Total Displacement: 91.47 in³ (1.5 L)
- Bore: 3.27 in (83 mm)
- Stroke: 3.64 in (92.4 mm)
- Compression Ratio: 22.8:1
- Governor Type: All speed mechanical governor + Electronic governor
- Rated RPM: 1800
- Rotation: Anti-clockwise viewed on flywheel
Engine Electrical System
- Charging Alternator: 12V
- Alternator Rating: 40 amp
- Starter Motor Power: 1.4 kW
- Starter Motor Rated Voltage: 12V DC
- Battery Quantity x Rating: 1 x 55 Ah
Fuel System
- Type of Injection: Throttle type
- Fuel Injection Pump: In-line pump
- Fuel Injection Pressure: 13.7 MPa (1990 psi)
- Fuel Filter & Water Separator: Available
Fuel Consumption
- 100% Load (Standby): 1.19 gal/hr
Exhaust System
- Max. Back Pressure: 7.1 kPa
- Exhaust system with DOC + SCR
Cooling System
- Coolant Capacity: 7 L (1.85 gal)
- Air Filter: Paper Element
Lubrication System
- Oil Capacity: 5.6 L (1.5 gal)
- Oil Filter: Spin on, replaceable
Alternator Characteristics
- Manufacturer: Stamford
- Model: PI044G - 60Hz
- Design: 4 Pole, drip proof rotating field
- Exciter Type: Self Excited
- Stator: 2/3 winding pitch
- Rotor: Single bearing, flexible disc
- Leads: 12
- Insulation: Class H
- Temp. Rise @ 40°C ambient: 125°C Prime
- Max. Over-speed: 2250 rev/min
- Voltage Regulator: AS480
Optional 4-Position VSS (kW Rating at 1800 rpm / 60 Hz)
- 480/277V - 3ph – 0.8pf: 16 kW
- 208/120V - 3ph - 0.8pf: 14 kW
- 240/120V - 1ph – 1pf: 12 kW
Gen-Set Canopy Dimensions
- Length: 77.4 in
- Width: 37.63 in
- Height: 52.52 in
- Dry Weight: 1,896 lb
- Fuel Tank Capacity: 29.06 gal
- Genset Sound Level (dBA @ 23ft): TBD
Control Panel
- Control Module: DSE
- Control Module Model: DSE 7320
- Communication Ports: MODBUS
- UL recognized, NFPA110 Level 1 compatible
- LCD text display, key menu navigation and front panel editing
- Off/Manual/Auto mode switch
- Two-wire starting/stopping in Auto mode
- Engine exerciser
- IP65 front panel rating with supplied sealing gasket
- Configurable 8 inputs, 6 analogue inputs, 6 DC outputs with expansion capability
- Real time clock provides accurate event logging
- Fully configurable via DSE Configuration Suite PC software
- Remote SCADA monitoring and BMS integration features
Base-Frame Enclosure
- Complete gen-set mounted entirely on a heavy duty base frame with integral double wall fuel tank
- Anti-vibration isolators installed between engine/alternator supports and the base frame
- Module-principle enclosure design without welding
- Four doors on each side for easy serviceability and back door for control system
- Exhaust silencer coated against environmental outdoor conditions, internally mounted
- Exhaust pipe thermally insulated on engine compartment
- Electrostatic polyester powder-painted metal enclosure parts
- Fuel filling cap within the enclosure, reachable through lockable door
- Emergency stop switch externally mounted on enclosure
- Phosphate chemical pre-coating of steel for corrosion resistance
- Lockable hinged panel door for easy component access
Standard Features & Accessories
- Trailer w/spare tire and tool box
- Sound Attenuated Steel Enclosure
- Heavy Duty Steel Base-frame
- Exhaust system with DOC + SCR
- Flex Fuel Lines
- Oil Drain Valve & Extension
- Convenience Panel
- Voltage Selector Switch – 3 position
- Emergency Stop Switch
- Battery, Battery Rack & Cables
- Battery Charger (Input: 196-264V, Output: 27.6V 5A or 13.8V 5A)
- Main Line CB
- Jacket Water Heater (120 VAC, 1000 W)
- Operations Manual
- 1 Year / 2000 hours Limited Warranty
Convenience Panel Accessories
- (2) Two 20A, 120V GFCI receptacles and breakers
- (3) Three 50A, 240V twist lock receptacles and breakers
- 5-15A, 125V inlet receptacles for battery charger and water heater
- Two wire remote start station
Voltage Selector Switch
- Three positions at 480/277V, 208/120V - 3ph & 240/120 - 1ph
- Product of Salzer or Kraus&Naimer
Circuit Breaker
- 250 Amp capacity main line circuit breaker
- Shunt trip controller by generator set control
Trailer
- DOT approved 10,000 lbs heavy duty dual axle trailer
- Spring axles w/electric brakes
- Breakaway kit with charger
- 5000 lbs front jack and rear stabilizer jacks
- 7 pin trailer plug
- Tool box and spare tire
Optional Accessories
- Upsized Alternator
- PMG Excitation
- Alternator Anti-condensation Heater
- 4 Position VSS
- Fuel Level Monitoring on Controller & High Fuel Alarm
- Fuel Line Check Valve
- Oil Temperature Gauge
- Oil Heater
- Battery Charger 10Amp
- Battery Heater Blanket
- Main Line CB (100% rated)
- Remote Monitoring and Control
- Remote Annunciator
Standards
- EPA Certified Tier 4 – FINAL engine powered generator set for Mobile / Prime Applications
- Designed and manufactured in a facility certified to ISO 9001:2015
- UL recognized, NFPA110 Level 1 compatible
- Electrical Safety / EMC compatibility
- BS EN 60950 Electrical business equipment
- BS EN 61000-6-2 EMC immunity standard
- BS EN 61000-6-4 EMC emission standard
- Stamford alternators meet BS EN 60034 requirements
product specifications:
| Specification | Value |
| Model Name | APD-EPAK13T4 |
| Frequency | 60 Hz |
| Fuel Type | Diesel |
| Engine Make and Model | Kubota D1503-M-E4BG (Tier-4) |
| Alternator Make and Model | Stamford PI044G |
| Control Panel Model | DSE 7320 |
| Standby Rating (240/120V, 1-Phase) | 12.6 kW / 12.6 kVA |
| Standby Rating (208/120V, 3-Phase) | 13.2 kW / 16.5 kVA |
| Standby Rating (480/277V, 3-Phase) | 13.2 kW / 16.5 kVA |
| Prime Rating (240/120V, 1-Phase) | 11.9 kW / 11.9 kVA |
| Prime Rating (208/120V, 3-Phase) | 12.4 kW / 15.5 kVA |
| Prime Rating (480/277V, 3-Phase) | 12.4 kW / 15.5 kVA |
| Engine | Kubota |
| Engine Model | D1503-M-E4BG |
| Number of Cylinders | 4 cylinders - in line |
| Net Stand-by Power | 16.2 kW (21.7 HP) / 1800 rpm |
| Net Continuous Power | 15.1 kW (20.2 HP) / 1800 rpm |
| Aspiration & Cooling | Naturally Aspirated |
| Compression Ratio | 22.8:1 |
| Governor Type | All speed mechanical governor + Electronic governor |
| Rated RPM | 1800 |
| Rotation | Anti-clockwise viewed on flywheel |
| Charging Alternator | 12V |
| Alternator Rating | 40 amp |
| Starter Motor Power | 1.4 kW |
| Starter Motor Rated Voltage | 12V DC |
| Battery Quantity x Rating | 1 x 55 Ah |
| Type of Injection | Throttle type |
| Fuel Injection Pump | In-line pump |
| Fuel Injection Pressure | 13.7 MPa (1990 psi) |
| Fuel Filter & Water Separator | Available |
| Fuel Consumption, 100% Load (Standby) | 1.19 gal/hr |
| Max. Back Pressure (Exhaust) | 7.1 kPa |
| Coolant Capacity | 1.85 gal |
| Air Filter | Paper Element |
| Oil Capacity | 1.5 gal |
| Oil Filter | Spin on, replaceable |
| Alternator Design | 4 Pole, drip proof rotating field |
| Exciter Type | Self Excited |
| Insulation Class | Class H |
| Max. Over-speed | 2250 rev/min |
| Voltage Regulator | AS480 |
| Length (in.) | 77.40 |
| Width (in.) | 37.63 |
| Height (in.) | 52.52 |
| Dry Weight (lbs.) | 1,896 |
| Fuel Tank Capacity | 29.06 gal |
| Genset Sound Level (dBA @ 23ft) | TBD |
| Trailer | DOT approved 10,000 lbs. heavy duty dual axle trailer |
| Enclosure | Sound Attenuated Steel Enclosure |
| Emissions Compliance | EPA Certified Tier 4 - Final |
| Standard Compliance | NFPA 110 Level 1 compatible |
| Warranty | 1 Year / 2,000 hours Limited Warranty |
product related documents:
| Weight | 1896 lbs |
|---|---|
| Dimensions | 77.4 × 37.63 × 52.52 in |
Only logged in customers who have purchased this product may leave a review.





Reviews
There are no reviews yet.