Cummins 125kW 3PH 120/208V Home Standby Generator Quiet Connect™ RS125 3PH 120/208V
Cummins 125kW 3PH 120/208V Home Standby Generator Quiet Connect™ RS125 3PH 120/208V
$38,509.76
Quiet Connect™
The Cummins Quiet Connect™ Series offers a wide range of powerful backup solutions for many sized homes, designed specifically for its quiet and powerful performance. The compact design and sleek aesthetics allow the generator to blend in to any yard. Cummins home standby generators are backed by an industry leading warranty and nearly 100 years of Cummins expertise powering lives from backing up hospitals and data centers to powering trucks, boats and RVs. Cummins – powering your life.
Available ex factory. (Call to confirm)
Cummins 125kW 3PH 120/208V Home Standby Generator Quiet Connect™ RS125 3PH 120/208V
Details and Specifications
Features:
- Designed to be extremely quiet and neighborhood friendly
- Compact and aesthetically pleasing design blends into your landscape
- Generator equipped with Cummins PowerCommand electronic control to provide industry leading self-diagnostic capabilities
- Robust design so the generator can handle even the harshest of weather conditions
- Flexible exercise mode to suit your preference and reduces unnecessary fuel consumption, emissions and noise
Specifications:
- Operates on natural gas
- Length 143.0 inches, width 40.0 inches, height 72.0 inches
- Weight of generator is 3915[*] pounds
- Sound level is 73 dB(A) at 23 feet with sound level 2 enclosure
- Manufacturer’s 2 year warranty
[*] Weight above is average. Actual weight varies with product configuration
Product Specifications:
Product Features
Engine:
- Natural gas/propane
- Engine air cleaner – normal duty
- Electronic governor, isochronous
- Engine starter, 12 VDC motor
- Shutdown – low oil pressure
- Extension – oil drain
- Engine oil – included
Fuel System:
- Single fuel – natural gas or propane vapor, field selectable
Alternator:
- 60 Hz, 1 phase, 4 lead, or 3 phase, 12 lead, 120° C temperature rise at 40° C ambient
- Exciter/voltage regulator – torque match
Control:
- PowerCommand 2.3
- Display language – English
- Control mounting, left facing
Electrical:
- Single circuit breaker, UL certified, right-side mounted
- Battery charging alternator, normal duty
- Battery charger – 6 Amp, regulated
Cooling:
- Generator set cooling capability – 50° C
- Shutdown – low coolant level
- Engine coolant – 50/50 mixture
- Extension – coolant drain
Enclosure:
- Aluminum enclosure Sound Level 1 with muffler installed, sandstone color
- Wind rating – 180 mph
Code Compliance:
- UL 2200
- EPA emissions, emergency, stationary, 40CFR60
- IBC Seismic
- NFPA 110 capable
Generator set application
- Coolant heater
- Battery rack
- Literature (English) – operator’s manual, installation
Packaging
- Shipping pallet
Warranty
Base warranty – 2-year standby
Extended warranties available
Generator Set performance
Governor regulation class: ISO 8528 Part 1 Class G2
Voltage regulation, no load to full load: ±1.0%
Random voltage variation: ±1.0%
Frequency regulation: Isochronous
Random frequency variation: ± 0.25% @ 60 Hz
Radio frequency emissions compliance: FCC code Title 47 part 15 Class B
See Accessories section for details on kits
Engine Specifications
Design: Turbocharged and aftercooled
Cylinder block: Cast iron, in-line 6 cylinder
Bore: 114.1 mm (4.49 in)
Stroke: 144.5 mm (5.69 in)
Displacement:8.9 liters (543 in3)
Battery capacity: 850 Amps at ambient temperature of 0° F
to 32° F (-18° C to 0° C)
Battery charging alternator: 100 Amps
Starting voltage: 12-Volt, negative ground
Lube oil filter type(s): Spin-on with relief valve
Standard cooling system: 50° C (122° F) ambient
cooling system
Rated speed: 1800 rpm
Fuel Supply Pressure
Minimum: 1.5 kPa (6.0 in H20)
Maximum: 3.5 kPa (13.0 in H20)
Typical Fuel Consumption:
RS125 Fuel consumption – natural gas:
Load: | 3/4 | Full |
ft3 / hr. | 1305.8 | 1665.6 |
m3 / hr. | 36.98 | 47.17 |
RS125 Fuel consumption – Propane:
Load: | 3/4 | Full |
ft3 / hr. | 517.3 | 674.1 |
m3 / hr. | 14.65 | 19.09 |
Sound: 75 dB(A) at 23 ft. (7 m) with sound level 1 enclosure [*]
Rated amp[**] (NG / LPV): 433.6 / 433.6
[*] Quietest point at a normal load.
Sound performance may be affected by installation.
[**] Derating guidelines: Engine power available up to 1800 m (5900 ft.) and ambient temperatures up to 40° C (104° F).
Above these conditions, derate at 4.25% per 300 m (985 ft.) and 2% per 10° C (18° F)
PRODUCT Related documents:
EPA Exhaust Emission Compliance Statement
IBC Seismic Certificate of Compliance
IBC Seismic Installation Requirements
Outline Drawing, Genset Foundation
Outline Drawing, Sound Attenuation Level 1 and Level 2 Enclosure
Weight | 3915 lbs |
---|---|
Dimensions | 143 × 40 × 72 in |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.