Kohler 45KW, 3-Phase Diesel Marine Generator Open unit 45EFOZCJ

45EFOZCJ Kohler Marine Details and Specifications

Included Accessories

Included Accessories

• Battery (positive and negative)
• Equipment ground
• Fuel inlet and return
• Seawater inlet
• Water-cooled exhaust outlet
• Oil drain
• Customer load lead access

Siphon Break

Mandatory kit on generators installed below the waterline. Prevents the siphoning of flotation water into the engine.

Line Circuit Breaker

Protect the generator from extreme overload.

Engine Features

• One-side serviceability of fuel system, lubrication system, and air Cleaner
• Low oil pressure cutout
• High water temperature cutout
• Loss of coolant cutout
• Overcrank cutout
• Belt guard
• Optional digital gauge
• Disposable oil filter
• Extended oil drain
• PTO options: 12- or 24-volt electric clutch

Alternator Features

• NEMA MG1, IEEE, and ANSI standards compliance for temperature rise and motor starting.
• Capable of sustained line-to-neutral short circuit current of up to 300% of the rated current for up to 2 seconds. Capable of sustained short circuit current of up to 300% of the rated current for up to 10 seconds for 3 phase connections. (IEC 60092-301 short-circuit performance.)
• Sustained short-circuit current enabling downstream circuit breakers to trip without collapsing the alternator field.
• Self-ventilated and dripproof construction.
• Vacuum-impregnated windings with epoxy varnish for dependability and long life.
• Superior voltage waveform from a two-thirds pitch stator and skewed rotor.

Decision-Maker® 3500 Controller

Provides advanced control, system monitoring, and system diagnostics for optimum performance and compatibility. The Decision-Maker® 3500 controller uses a patented hybrid voltage regulator and unique software logic to manage alternator thermal overload protection features normally requiring additional hardware. Additional features include:

• AC Output Voltage Regulator Adjustment. The voltage adjustment provides a maximum adjustment of ±10% of the system
• Alarm The controller can be set up to silence the alarm horn only when in the AUTO mode for NFPA-110 application or Always for user convenience.
• Alternator Protection. The controller provides generator set overload and short circuit protection matched to each alternator for the particular voltage/phase
• Automatic Restart. The controller automatic restart feature initiates the start routine and recrank after a failed start
• Cyclic The controller has programmable cyclic cranking.
• ECM The controller displays engine ECM fault code descriptions to help in engine troubleshooting.
• Engine Start The configurable starting aid feature provides customized control for an optional engine starting aid.
• Event Logging. The controller keeps a record (up to 1000 entries) for warning and shutdown faults. This fault information becomes a stored record of system events and can be
• Historical Data Total number of successful starts of the generator is recorded and displayed.
• Integrated Hybrid Voltage The voltage regulator provides ±0.5% no-load to full-load RMS voltage regulation with three-phase sensing.
• Lamp Press the alarm silence/lamp test button to verify functionality of the indicator lights.
• LCD Adjustable contrast for improving visibility.
• Measurement The controller provides selection of English or metric displays.
• Power Controller graphical display provides voltage, current, power factor, kW, kVA, and kVAR.
• Programming Access (USB). Provides software upgrades and diagnostics with PC software
• Remote Reset. The remote reset function supports acknowledging and resetting faults and allows restarting of the generator set without going to the master control switch off/reset
• Run Time The generator set run time is displayed.
• Time Delay Engine Cooldown (TDEC). The TDEC provides a time delay before the generator set shuts
• Time Delay Engine Start (TDES). The TDES provides a time delay before the generator set
• Voltage Selection This menu provides the capability to switch the generator output voltage. NOTE: Generator set output leads may require reconnection.
• Paralleling Functions:
  • Bus sensing
  • First on logic
  • Synchronizing
  • Communication based isochronous load sharing
  • Droop load sharing
  • External controlled load sharing via analog bias signals

Product Specifications

PRODUCT Related documents:

DimensionalDrawing

OperationManualEngine

SpecPDFFileName

OperationManualGenerator