PD180-01 product details and specifications:

General 

• Model: PD180-01 

• Power Rating: 180 kWe Standby 

• Frequency: 60 Hz 

• Speed: 1800 RPM 

• Fuel Type: Diesel 

• Application: Emergency Stationary Standby 

• Paint Color: White (Gray Available) 

• Warranty: 2 Year / 2000 Hour Standby Limited 

Engine 

• Manufacturer: Perkins 

• Model: 1106D-E70TAG4 

• Type: 4-Cycle, 6 Cylinder Inline 

• Aspiration: Turbo Charged, CAC (Charge Air Cooled) 

• Displacement: 428 cu. in. (7.01 L) 

• Bore x Stroke: 4.13 in. x 5.31 in. (10.5 cm x 13.5 cm) 

• Compression Ratio: 16.8:1 

• Governor: Electronic Isochronous 

• Max HP Standby: 281 HP (210 kWm) 

• EPA Certified: Tier 3 

• Oil Drain Extension: Plumbed to Bulkhead Fitting in Base 

Electrical / Alternator 

• Alternator Model: Stamford UCI274G 

• Alternator Type: Brushless Single Bearing 

• Winding: 12 Lead Wired 

• Connection (480V): 12 Lead High Wye 

• Voltage Options: 120/240V Single Phase or 277/480V Three Phase 

• Power Factor: 0.8 

• Amps at 480V: 271 A 

• Amps at 240V (1-Phase): 750 A 

• Temperature Rise: 125°C Rise Over 40°C Ambient 

• Voltage Regulation: +/- 0.5% (with PMG) 

• Harmonic Content: 5% Maximum 

• Insulation Class: H 

• Standards: NEMA MG1, IEEE, ANSI 

Voltage Regulator 

• Model: Stamford MX321 

• Type: Three-Phase Sensed Automatic Voltage Regulator 

• Excitation: PMG (Permanent Magnet Generator) 

• Regulation: +/- 0.5% RMS 

• Soft Start Ramp Time: 0.4 to 4 seconds 

Control Panel 

• Model: Blue Star DCP7310 Microprocessor Based Gen-Set Controller 

• Panel Location: Mounted Facing Left from Generator End 

• Shutdowns: Low Oil Pressure, High Coolant Temp, Overspeed, Overcrank 

• Alarms: Emergency Stop Pushbutton, Audible Alarm Buzzer with Silencing Switch 

• Display: 4-Line Back-Lit LCD 

• Communications: RS485, CAN Bus (J1939), MODBUS RTU & TCP 

• Rating: IP65 (with supplied gasket) 

• Listed: cULus Listed, CE Approved 

• NFPA 110 Level 1 Compatible 

Cooling System 

• Type: Unit Mounted Radiator 

• Ambient Capacity: 50°C (122°F) 

• Water Pump Flow Rate: 44.9 GPM 

• Heat Rejection to Coolant: 4,880 BTUM 

• Heat Rejection to CAC: 2,091 BTUM 

• Heat Radiated to Ambient: 3,637 BTUM 

• Air Flow Required: 7,173 CFM 

Exhaust System 

• Exhaust Gas Temperature at Stack: 948°F (509°C) 

• Exhaust Gas Volume at Stack Temp: 1,211 CFM 

• Maximum Allowable Exhaust Restriction: 60.0 in. H2O 

• Silencer: Critical Grade Compact CPJ Series, Mounted to Engine 

Fuel System 

• Fuel Consumption at 100%: 13.2 gal/hr 

• Fuel Consumption at 75%: 10.9 gal/hr 

• Fuel Consumption at 50%: 6.81 gal/hr 

• Air Cleaner: Dry Single Stage 

• Air Restriction Indicator: Installed in Air Filtration System 

• Flexible Fuel Connector: Included 

Fuel Tank Options 

• 24 Hour / 375 Gallon — UL 142 Listed Sub-Base, Double Wall, Secondary Containment 

• 48 Hour / 750 Gallon — UL 142 Listed Sub-Base, Double Wall, Secondary Containment 

• 72 Hour / 1125 Gallon — UL 142 Listed Sub-Base, Double Wall, Secondary Containment 

• Includes: Supply & Return Connections, Fuel Level Gauge, Fuel Leak Switch, Fill & Vent Plumbing 

Enclosure 

• Type: Level 2 — Weather Proof with Sound Attenuation Foam 

• Material: Powder Coated 14 Gauge Steel 

• Wind Rating: 200 MPH (IBC 2021 / ASCE/SEI 7-16 Certified) 

• Roof: Pitched for Increased Structural Integrity and Improved Watershed 

• Doors: Keyed Alike Lockable with Draw Down Latches and Stainless Steel Hinges 

• Sound Foam: 1.5 Inch Polydamp Type D Acoustical Foam (PAF) 

• Base: Formed Steel with Mounting and Lifting Holes 

• Vibration Isolation Mounts: Included 

Weights & Dimensions 

• OPU: 110 x 54 x 65 in. — 3,925 lbs. 

• Level 1 Enclosure: 130 x 54 x 74 in. — 4,825 lbs. 

• Level 2 Enclosure: 130 x 54 x 74 in. — 4,875 lbs. 

• Level 3 Enclosure: 164 x 54 x 74 in. — 5,100 lbs. 

Sound Data 

• OPU: 81 dBA (No Load) / 85 dBA (Full Load) 

• Level 1: 79 dBA (No Load) / 81 dBA (Full Load) 

• Level 2: 74 dBA (No Load) / 77 dBA (Full Load) 

• Level 3: 70 dBA (No Load) / 72 dBA (Full Load) 

• Measured at 23 feet (7 meters) per ISO 8528-10 

Electrical Accessories 

• Mainline Breaker: 300 Amp 3 Pole 600 Volt — Mounted & Wired in NEMA 1 Enclosure 

• Battery: 12 Volt System with Rack and Cables 

• Battery Charger: 12 Volt 6 Amp — Mounted and Wired to Terminal 

• Block Heater: 2000W 240VAC Engine Block Heater, Rated for -20°F 

• Block Heater: Installed with Isolation Valves and Wired to Terminal 

Certifications & Standards 

• UL 2200 & cUL Listed 

• CSA Certified 

• EPA Tier 3 

• NFPA 110 / CSA C282 Compliant 

• Seismic Certified to IBC 2021 

• 200 MPH Wind Rating — IBC 2021 / ASCE/SEI 7-16 

Factory Test 

• Standard Commercial Testing: Verification of Alarm Shutdowns, Voltage Settings, Block Loading to Rated kWe and PF 

• All units built and tested to cUL, CSA and NFPA 110 standards 

product specifications:

product related documents:

2026 EPA Cert_TPKXL07.0PW1-002 PD180-01, PD200-01.pdf

PD180-01 Engine Data Sheet 12-5-23.pdf

PD180-01_Drawings.pdf

PD180-01_SpecSheet.pdf

PD180-01.pdf