PD125-01 product details and specifications:

General Overview 

• Model: PD125-01 — Blue Star Power Systems Diesel Product Line 

• Power Rating: 125 kWe Standby 

• Application: Emergency Stationary Standby 

• Fuel: Diesel 

• Frequency: 60 Hz 

• Speed: 1800 RPM 

• Voltage Options: 120/240V Single Phase or 277/480V Three Phase 

• Power Factor: 0.8 (three phase) / 1.0 (single phase 240V) 

• Unit Color: White 

Certifications & Compliance 

• UL 2200 & cUL Listed 

• CSA Approved 

• EPA Tier 3 Certified 

• Seismic Certified to IBC 2021 

• NFPA 110 / CSA C282 Compliant 

• Made in USA 

Engine 

• Manufacturer: Perkins 

• Model: 1106D-E70TAG2 

• Type: 4-Cycle, Turbocharged, Air Charge Cooled (CAC) 

• Cylinder Arrangement: 6 Cylinder Inline 

• Displacement: 428 Cu. In. (7.01 L) 

• Bore x Stroke: 4.13 in. x 5.31 in. (105 mm x 135 mm) 

• Compression Ratio: 16.8:1 

• Rated RPM: 1800 

• Max HP Standby: 229 HP (171 kWm) 

• Governor: Electronic Isochronous 

• Combustion System: Direct Injection Diesel 

Alternator 

• Model: Stamford UCI274E 

• Type: Brushless Single Bearing 

• Leads: 12 Lead Wired 

• 480V Connection: 12 Lead High Wye 

• 240V Three Phase Connection: 12 Lead Delta 

• 208V Connection: 12 Lead Wye 

• 600V Connection: 4 Lead Wye 

• Temperature Rise: 125°C Standby over 40°C Ambient 

• Insulation: Class H 

• Poles: 4 Pole, Rotating Field 

• Load Step: 100% of Rated Load in One Step 

• Maximum Harmonic Content: 5% 

• Standards: NEMA MG1, IEEE, ANSI 

Voltage Regulator 

• Model: Stamford AS440 Automatic Voltage Regulator 

• Regulation: ±1% 

• Type: Half-wave phase controlled thyristor AVR 

• Sensing Input: 190–264VAC, 1-phase, 50–60 Hz 

• External Voltage Adjustment: ±10% with 1k ohm trimmer 

• Soft Start Ramp Time: 3 seconds 

• Over Excitation Protection Set Point: 65VDC 

Control Panel 

• Model: Blue Star DCP7310 Microprocessor Based Gen-Set Controller 

• Mounted: Facing left from generator end (unless specified otherwise) 

• Display: 4-Line back-lit LCD with five-key menu navigation 

• Standard Shutdowns: Low Oil Pressure, High Coolant Temp, Overspeed, Overcrank 

• Standard Alarms: Emergency Stop Pushbutton, Audible Alarm Buzzer with Silencing Switch 

• Communication: CAN Bus (J1939) ECU, RS485 Communicator Interface 

• Event Log: 250 events 

• Inputs/Outputs: 8 programmable contact inputs, 10 contact outputs 

• Rating: IP65 (with supplied gasket), cULus Listed, CE Approved 

• NFPA Compatibility: NFPA 110 Level 1 Compatible 

Enclosure (Level 2 — Standard) 

• Type: Weather Proof with Foam 

• Material: 14 Gauge Powder Coated Steel 

• Wind Rating: 200 MPH — IBC 2021 / ASCE/SEI 7-16 Certified 

• Roof: Pitched for increased structural integrity and improved watershed 

• Intake/Exhaust: Punched intake with baffle and punched exhaust openings 

• Doors: Keyed Alike Lockable with Draw Down Latches and Stainless Steel Hinges 

• Sound Attenuation: 1.5" Polydamp Type D Acoustical Foam (PAF) installed 

• Base: Formed Steel with mounting and lifting holes 

• Vibration Isolation: Vibration mounts to isolate unit from base rail 

Dimensions & Weight 

• OPU: 110 x 54 x 65 in. — 3,700 lbs. 

• Level 1 Enclosure: 130 x 54 x 82 in. — 4,600 lbs. 

• Level 2 Enclosure: 130 x 54 x 82 in. — 4,650 lbs. 

• Level 3 Enclosure: 164 x 54 x 74 in. — 4,875 lbs. 

• Note: Allow 6–12 inches for height of exhaust stack 

Sound Data 

• OPU: No Load 82 dBA / Full Load 85 dBA 

• Level 1: No Load 80 dBA / Full Load 82 dBA 

• Level 2: No Load 75 dBA / Full Load 78 dBA 

• Level 3: No Load 71 dBA / Full Load 73 dBA 

• Measurement: At 23 feet (7 meters) per ISO 8528-10 

Cooling System 

• Type: Unit Mounted Radiator, 50°C (122°F) Ambient Rated 

• Water Pump Flow Rate: 44.9 GPM (170 lit/min) 

• Heat Rejection to Coolant: 4,280 BTUM (74.9 kW) 

• Heat Rejection to CAC: 1,857 BTUM (32.5 kW) 

• Heat Radiated to Ambient: 2,572 BTUM (45.0 kW) 

• Max Allowable Static Pressure on Rad. Exhaust: 0.50 in. H₂O (0.12 kPa) 

Exhaust System 

• Exhaust Gas Temperature at Stack: 842°F (450°C) 

• Gas Volume at Stack Temp: 1,057 CFM (29.9 m³/min) 

• Max Allowable Exhaust Restriction: 60.0 in. H₂O (15.0 kPa) 

• Silencer: Critical Grade Compact CPJ Series Silencer Mounted to Engine 

Air Requirements 

• Aspirating Air Flow: 509 CFM (14.4 m³/min) 

• Air Flow Required for Radiator Cooled Unit: 7,173 CFM (203 m³/min) 

• Air Cleaner: Dry Single Stage 

• Air Restriction Indicator: Installed in air filtration system 

Fuel System 

• Fuel Consumption at 100% Load: 9.58 gal/hr (36.3 lit/hr) 

• Fuel Consumption at 75% Load: 7.87 gal/hr (29.8 lit/hr) 

• Fuel Consumption at 50% Load: 5.62 gal/hr (21.3 lit/hr) 

• Flexible Fuel Connector Included 

Sub-Base Fuel Tank Options 

• 24-Hour Tank: 250 Gallon — UL 142 Listed, Double Wall Secondary Containment with Stub-up Area 

• 48-Hour Tank: 500 Gallon — UL 142 Listed, Double Wall Secondary Containment 

• 72-Hour Tank: 750 Gallon — UL 142 Listed, Double Wall Secondary Containment 

• Includes: Supply & Return Connections, Fuel Level Gauge, Fuel Leak Switch, Fill & Vent Plumbing 

Fluids Capacity 

• Total Oil System: 4.62 gal (17.5 lit) 

• Engine Jacket Water: 2.51 gal (9.50 lit) 

• System Coolant Capacity: 5.55 gal (21.0 lit) 

Electrical & Accessories 

• Battery: 12 Volt System with Rack and Cables 

• Battery Charger: 12 Volt 6 Amp, Mounted and Wired to Terminal 

• Jacket Water Heater: 2000W 240VAC, Rated for -20°F, Installed with Isolation Valves and Wired to Terminal 

• Mainline Breaker: 200 Amp 3 Pole 600 Volt Breaker Mounted and Wired in NEMA 1 Enclosure 

• Oil Drain Extension: Plumbed to Bulkhead Fitting in Base 

Factory Test & Warranty 

• Factory Test: Standard Commercial Testing — Alarm Shutdowns, Voltage Settings, Block Load to Rated kWe and PF 

• Warranty: 2 Year / 2,000 Hour Standby Limited Warranty 

• All units built and tested to cUL, CSA and NFPA 110 standards 

product specifications:

product related documents:

2026 EPA Cert_TPKXL07.0PW1-002 PD125-01, PD150-01.pdf

PD125-01_Drawings.pdf

PD125-01_SpecSheet.pdf

PD125-01 Engine Data Sheet 12-5-23.pdf

PD125-01.pdf