JD200-01 product details and specifications:

General Overview 

• Model: JD200-01 — Blue Star Power Systems Diesel Product Line 

• Power Rating: 200 kWe Standby 

• Frequency: 60 Hz / Speed: 1800 RPM 

• Fuel: Diesel 

• Application: Emergency Stationary Standby 

• UL 2200 & cUL Listed; CSA Certified; EPA Tier 3 

• Seismic Certified to IBC 2021; NFPA 110 / CSA C282 Compliant 

Voltage & Phase Ratings 

• 1-Phase, 240V: 200 kWe, 833 Amps, PF 1.0, Generator S4L1S-E4, 12 Lead DD 

• 3-Phase, 208V: 200 kWe, 695 Amps, PF 0.8, Generator UCDI274J1, 12 Lead Wye 

• 3-Phase, 240V: 200 kWe, 602 Amps, PF 0.8, Generator UCDI274J1, 12 Lead Delta 

• 3-Phase, 480V: 200 kWe, 301 Amps, PF 0.8, Generator UCI274H, 12 Lead Wye 

• 3-Phase, 600V: 200 kWe, 241 Amps, PF 0.8, Generator UCI274H, 4 Lead Wye 

• Temperature Rise: 125°C / 40°C Ambient (all configurations) 

Engine 

• Manufacturer: John Deere 

• Model: 6068HFG85 (PowerTech Plus 6.8L) 

• Type: 4-Cycle, 6-Cylinder Inline 

• Aspiration: Turbocharged, Charge Air Cooled (CAC) 

• Displacement: 415 Cu. In. (6.80 L) 

• Bore: 4.19 in. (10.6 cm) | Stroke: 5.00 in. (12.7 cm) 

• Compression Ratio: 17.0:1 

• Rated RPM: 1800 

• Max HP Standby: 315 HP (235 kW) 

• Governor: Electronic Isochronous 

• Fuel Injection: Denso HP3 Pump, L14 ECU Controller 

Engine Performance & Fluids 

• Fuel Consumption at 100% Load: 14.5 gal/hr 

• Fuel Consumption at 75% Load: 10.8 gal/hr 

• Fuel Consumption at 50% Load: 7.65 gal/hr 

• Total Oil System Capacity: 8.59 gal 

• Engine Jacket Water Capacity: 3.14 gal 

• System Coolant Capacity: 7.10 gal 

• Exhaust Gas Temp (Stack): 905°F (485°C) 

• Exhaust Gas Volume at Stack Temp: 1,515 CFM 

• Max Allowable Exhaust Restriction: 40.0 in. H2O 

• Aspirating Air Flow: 618 CFM 

• Air Flow Required for Radiator Cooled Unit: 11,066 CFM 

Alternator / Generator 

• Manufacturer: Stamford (Nidec) 

• Type: Brushless, Single Bearing 

• Winding: Double Layer Concentric, 2/3 Pitch, 12 Leads 

• Insulation System: Class H 

• Poles: 4 Pole, Rotating Field 

• Voltage Regulator: Stamford MX321 AVR with PMG Excitation 

• Voltage Regulation: ±1% 

• Temperature Rise: 125°C Standby / 40°C Ambient 

• Maximum Harmonic Content: 5% 

• Standards: NEMA MG1, IEEE, ANSI 

• Load Acceptance: 100% of Rated Load in One Step 

Control Panel — Blue Star DCP7310 

• Type: Microprocessor-Based Digital Auto Start Controller 

• Display: 4-Line Back-Lit LCD, Heated (-40°F to 158°F) 

• Communications: CAN Bus J1939, RS485, MODBUS RTU & TCP 

• Inputs: 8 Programmable Contact Inputs 

• Outputs: 10 Contact Outputs (6 DC + 2 volt-free relay) 

• Protection: Low Oil Pressure, High Coolant Temp, Overspeed, Overcrank Shutdowns 

• Alarms: Audible alarm buzzer with silencing switch; Emergency Stop pushbutton 

• Generator Protection: Undervoltage (27), Overvoltage (59), Underfrequency (81U), Overfrequency (81O), Overcurrent (51), Reverse Power (32), Loss of Excitation (400), Phase Imbalance (47) 

• IP Rating: IP65 (with supplied gasket) 

• NFPA 110 Level 1 Compatible; cULus Listed, CE Approved 

• Software: Windows-based DSE Configuration Suite; Remote SCADA monitoring capable 

Enclosure 

• Type: Level 2 — Weather Proof with Acoustical Foam 

• Material: Powder Coated 14-Gauge Steel 

• Wind Rating: 200 MPH certified per IBC 2021 / ASCE/SEI 7-16 

• Roof: Pitched for structural integrity and watershed 

• Doors: Keyed-alike lockable with draw-down latches and stainless steel hinges 

• Sound Foam: 1.5" Polydamp Type D Acoustical Foam (PAF) 

• Intake/Exhaust: Punched intake with baffle and punched exhaust openings 

• Base: Formed steel with mounting and lifting holes; includes vibration isolation mounts 

• Finish: Cardinal Industrial Hammer Textured Semi-Gloss Polyester Powder Coat 

• Standard Colors: White or Gray; Custom colors available 

Enclosure Dimensions & Weights 

• OPU: 110 x 54 x 70 in. — 3,925 lbs. 

• Level 1 Enclosure: 130 x 54 x 74 in. — 4,800 lbs. 

• Level 2 Enclosure: 130 x 54 x 74 in. — 4,850 lbs. 

• Level 3 Enclosure: 164 x 54 x 74 in. — 5,150 lbs. 

Sound Data (at 23 ft / 7 m per ISO 8528-10) 

• OPU: 83 dBA No Load / 86 dBA Full Load 

• Level 1: 81 dBA No Load / 83 dBA Full Load 

• Level 2: 76 dBA No Load / 79 dBA Full Load 

• Level 3: 72 dBA No Load / 74 dBA Full Load 

Fuel Tanks 

• Standard: 24-Hour / 375-Gallon UL 142 Listed Double-Wall Sub-Base Fuel Tank 

• Optional: 48-Hour / 750-Gallon Sub-Base Tank 

• Optional: 72-Hour / 1,125-Gallon Sub-Base Tank 

• 24-Hr Tank Dimensions: 110 x 54 in. (L x W), 100 in. Height 

• 48-Hr Tank Dimensions: 144 x 54 in. (L x W), 110 in. Height 

• 72-Hr Tank Dimensions: 204 x 54 in. (L x W), 110 in. Height 

• Construction: Double wall secondary containment with electrical stub-up area 

• Includes: Supply & return connections, fuel level gauge, fuel leak switch, fill & vent plumbing 

Additional Standard Equipment 

• Cooling: Unit-mounted radiator sized for 50°C (122°F) ambient 

• Oil Drain Extension: Plumbed to bulkhead fitting in base 

• Air Cleaner: Dry Single Stage 

• Silencer: Critical Grade Compact CPJ Series, mounted to engine 

• Battery: 12-Volt system with rack and cables 

• Battery Charger: 12V / 6 Amp, mounted and wired to terminal 

• Jacket Water Heater: 2000W / 240VAC engine block heater, rated for -20°F, with isolation valves 

• Vibration Isolation Mounts: Included to isolate unit from base rail 

• Flexible Fuel Connector: Included 

Factory Testing & Warranty 

• Standard commercial load test: verification of alarm shutdowns, voltage settings, block loading to rated kWe and PF 

• All units built and tested to cUL, CSA, and NFPA 110 standards 

• Warranty: 2 Year / 2,000 Hour Standby Limited 

• Accessories warranty: 1 Year / 2,000 Hours

product specifications:

product related documents:

2026 EPA Cert 750har-tjdxl13-5179-002-pdf-data JD200-01.pdf

JD200-01 Engine Data Sheet 12-5-23.pdf

JD200-01_SpecSheet.pdf

JD200-01_Drawings.pdf

JD200-01.pdf