JD150-01 product details and specifications:

Engine 

General 

• Manufacturer: John Deere 

• Model: 6068HF285 

• Type: 4-Cycle, 6-Cylinder Inline 

• Aspiration: Turbocharged with Charge Air Cooling (CAC) 

• Displacement: 415 cu. in. (6.80 L) 

• Bore x Stroke: 4.19 in. (10.6 cm) x 5.00 in. (12.7 cm) 

• Compression Ratio: 19.0:1 

• Rated RPM: 1800 

• Max HP Standby: 237 HP (177 kWm) 

• Governor: Electronic Isochronous 

Exhaust System 

• Gas Temperature at Stack: 981°F (527°C) 

• Gas Volume at Stack Temp: 1,158 CFM (32.8 m³/min) 

• Maximum Allowable Exhaust Restriction: 30.0 in. H2O (7.50 kPa) 

Cooling System 

• Radiator Ambient Capacity: 122°F (50°C) 

• Maximum Allowable Static Pressure on Radiator Exhaust: 0.50 in. H2O (0.12 kPa) 

• Water Pump Flow Rate: 48.0 GPM (182 lit/min) 

• Heat Rejection to Coolant: 5,407 BTUM (94.6 kW) 

• Heat Rejection to CAC: 1,708 BTUM (29.9 kW) 

• Heat Radiated to Ambient: 3,021 BTUM (52.9 kW) 

Air Requirements 

• Aspirating: 448 CFM (12.7 m³/min) 

• Air Flow Required for Radiator-Cooled Unit: 10,683 CFM (302 m³/min) 

Fuel Consumption 

• At 100% Power Rating: 11.1 gal/hr (42.0 lit/hr) 

• At 75% Power Rating: 8.95 gal/hr (33.9 lit/hr) 

• At 50% Power Rating: 6.72 gal/hr (25.4 lit/hr) 

Fluids Capacity 

• Total Oil System: 5.02 gal (19.0 lit) 

• Engine Jacket Water Capacity: 3.14 gal (11.9 lit) 

• System Coolant Capacity: 6.10 gal (23.1 lit) 

Generator (Alternator) 

• Manufacturer: Stamford 

• Model (480V, 3Ph): UCI274F — 12 Lead Wye 

• Model (600V, 3Ph): UCI274F — 4 Lead Wye 

• Model (208V, 3Ph): UCI274G — 12 Lead Wye 

• Model (240V, 3Ph): UCI274G — 12 Lead Delta 

• Model (240V, 1Ph): UCDI274J1 — 12 Lead DD 

• Type: Brushless, Single Bearing 

• Voltage Regulator: Stamford AS440 Automatic Voltage Regulator 

• Voltage Regulation: ±1% 

• Poles: 4 Pole, Rotating Field 

• Standby Temperature Rise: 125°C Rise Over 40°C Ambient 

• One-Step Load Pick-up: 100% of Rated Load 

• Maximum Harmonic Content: 5% 

• Standards: NEMA MG 1, IEEE and ANSI 

• Insulation Class: Class H 

• Protection: IP23 

• Rated Power Factor: 0.8 

Voltage Ratings 

• 240V Single Phase: 150 kWe, 625 Amps, PF 1.0 

• 208V Three Phase: 150 kWe, 521 Amps, PF 0.8 

• 240V Three Phase: 150 kWe, 452 Amps, PF 0.8 

• 480V Three Phase: 150 kWe, 226 Amps, PF 0.8 

• 600V Three Phase: 150 kWe, 181 Amps, PF 0.8 

• All configurations: 60 Hz, 125°C/40°C Temperature Rise 

Control Panel — Blue Star DCP7310 

Standard Features 

• Microprocessor-based digital control panel 

• Mounted in NEMA 12 Enclosure 

• NFPA 110 Level 1 Compatible 

• Digital metering: kW, kVA, kVAr, kWh, frequency, voltage, amperage 

• CAN Bus (J1939) ECU Communications 

• Windows-based configuration software 

• Multilingual capability 

• 8 programmable contact inputs, 10 contact outputs 

• RS485 communicator interface 

• Event recording (250 events) 

• IP65 rating with supplied gasket 

• cULus Listed, CE Approved 

Engine Protection — Pre-Alarms 

• Low Oil Pressure 

• High Coolant Temperature 

• Low Coolant Temperature 

• Battery Overcharge (High Voltage) 

• Weak Battery (Low Voltage) 

• Low Fuel Level 

• Fuel Leak Detect 

• Engine kWe Overload 

• Maintenance Interval Timer 

Engine Protection — Shutdowns 

• Low Oil Pressure 

• High Coolant Temperature 

• Overspeed 

• Overcrank 

• Emergency Stop Pushbutton 

Generator Protection 

• Undervoltage (27) 

• Overvoltage (59) 

• Underfrequency (81U) 

• Overfrequency (81O) 

• Overcurrent (51) 

• Reverse Power (32) 

• Loss of Excitation (40Q) 

• Phase Imbalance (47) 

Enclosure 

• Level 2 — Weather Proof with Sound Attenuation Foam 

• Material: Powder Coated 14 Gauge Steel 

• Wind Rating: 200 MPH — Certified per IBC 2021 and ASCE/SEI 7-16 

• Roof: Pitched for structural integrity and watershed 

• Sound Attenuation: 1.5" Polydamp Type D Acoustical Foam (PAF) 

• Doors: Keyed alike lockable with draw down latches and stainless steel hinges 

• Intake: Punched with baffle; Exhaust: Punched openings 

• Base: Formed steel with mounting and lifting holes 

• Vibration isolation mounts included 

• Sound Level (Level 2, No Load): 75 dBA; Full Load: 78 dBA 

Enclosure Dimensions (Level 2) 

• Length x Width x Height: 130 in. x 54 in. x 74 in. 

• Weight: 4,425 lbs. 

Fuel Tank 

• Type: UL 142 Listed Sub-Base, Double Wall with Secondary Containment 

• Standard: 24 Hour / 375 Gallon 

• Optional: 48 Hour / 750 Gallon 

• Optional: 72 Hour / 1,125 Gallon 

• Features: Supply & Return Connections, Fuel Level Gauge, Fuel Leak Switch, Fill & Vent Plumbing 

• Construction: Heavy gauge steel, electrical stub-up area standard 

Additional Standard Equipment 

• Main Line Circuit Breaker: 225 Amp, 3 Pole, 600 Volt, Mounted & Wired in NEMA 1 Enclosure 

• Battery Charger: 12 Volt, 6 Amp, Mounted and Wired to Terminal 

• Jacket Water Heater: 2000W, 240VAC, Rated for -20°F, with Isolation Valves and Wired to Terminal 

• Oil Drain Extension: Plumbed to Bulkhead Fitting in Base 

• Air Cleaner: Dry Single Stage 

• Silencer: Critical Grade Compact CPJ Series, Mounted to Engine 

• Battery: 12 Volt System with Rack and Cables 

• Flexible Fuel Connector 

• Vibration Isolation Mounts 

• Single Source Supplier 

Sound Data 

• OPU: 82 dBA (No Load) / 85 dBA (Full Load) 

• Level 1: 80 dBA (No Load) / 82 dBA (Full Load) 

• Level 2: 75 dBA (No Load) / 78 dBA (Full Load) 

• Level 3: 71 dBA (No Load) / 73 dBA (Full Load) 

• Sound data measured at 23 feet (7 meters) per ISO 8528-10 

Factory Testing 

• Verification of alarm shutdowns and voltage settings 

• Block loading to rated kWe and power factor 

• No load and max load tests at 1.0 PF and 0.8 PF 

• Block loads at 0–25%, 0–50%, 0–75%, 0–100% of rated load 

• Test metering accuracy: 1.3% or better, NIST traceable 

• All procedures per MIL-STD-705C where applicable 

product specifications:

product related documents:

2026 EPA Cert 350hak-tjdxl06-8120-006 JD125-02, JD150-01.pdf

JD150-01 Engine Data Sheet 12-5-23.pdf

JD150-01_SpecSheet.pdf

JD150-01.pdf

JD150-01_Drawings.pdf