APD-EPAJ140T4 product details and specifications:

General Characteristics 

• Model Name: APD-EPAJ140T4 

• Frequency: 60 Hz 

• Fuel Type: Diesel 

• Engine Make and Model: John Deere 6068HFG05-PVL (Tier-4) 

• Alternator Make and Model: Stamford UCI274G 

• Control Panel Model: DSE 7320 

Power Ratings (60 Hz) 

• 240/120V, 1-Phase, PF 1: Standby 130 kW / 130 kVA (541.66 A); Prime 120 kW / 120 kVA (500 A) 

• 208/120V, 3-Phase, PF 0.8: Standby 140 kW / 175 kVA (485.77 A); Prime 130 kW / 162.5 kVA (451.07 A) 

• 480/277V, 3-Phase, PF 0.8: Standby 140 kW / 175 kVA (210.5 A); Prime 130 kW / 162.5 kVA (195.48 A) 

Engine Specifications 

• Engine: John Deere 

• Engine Model: 6068HFG05-PVL 

• Number of Cylinders: 6, in-line 

• Max Power @ Rated RPM: 160 kWm (215 BHP) 

• Brake Mean Effective Pressure: 1446 kPa @ prime 

• Aspiration & Cooling: Turbo Charged Air to Air After Cooled 

• Total Displacement: 415 in³ (6.8 L) 

• Bore: 4.2 in (106 mm) 

• Stroke: 5.0 in (127 mm) 

• Compression Ratio: 17.2:1 

• Governor Type: ECU, ISO8528-G3 

• Rated RPM: 1800 

• Rotation: Anti-clockwise viewed on flywheel 

Engine Electrical System 

• Charging Alternator: 12V, negative ground 

• Alternator Rating: 65 amp 

• Starter Motor Power: 3.0 kW 

• Starter Motor Rated Voltage: 12 VDC 

• Battery Quantity x Rating & CCA: 1 x 80Ah, 700 

Fuel System 

• Type of Injection: Direct 

• Fuel Injection Pump: Denso HP3 

• Fuel Prime Pump: Manual 

• Max Fuel Flow: 119 kg/hr (262 lb/hr) 

• Fuel Filter & Water Separator: Available 

Fuel Consumption 

• 110% Load (Standby): 9.5 gal/h 

• 100% Load (Prime): 8.8 gal/h 

• 75% Load (Prime): 7.1 gal/h 

• 50% Load (Prime): 5.3 gal/h 

Exhaust System 

• Exhaust Gas Flow: 18.7 m³/min 

• Max Back Pressure: 5.0 kPa 

• Max Exhaust Gas Temp in Manifold: 495°C 

Cooling System 

• Radiator Ambient Temp: TBD 

• Coolant Capacity: 43 L (11.359 gal) 

• Thermostat Operation Range: 85-97°C 

• Combustion Air Flow: 11.4 m³/min 

• Engine Coolant Flow: 468 L/min (124 gal/min) 

• Cooling Fan Air Flow: 314.73 m³/min 

• Max Restriction of Radiator: 0.873 kPa (3.50 in H2O) 

• Air Filter: Paper Element 

Lubrication System 

• Oil Capacity: 32.5 L (8.58 gal) 

• Oil Cooler: Water cooled 

• Oil Filter: Spin on, replaceable 

• Oil Temp (Continuous Operation): 138°C 

Alternator Characteristics 

• Manufacturer: Stamford 

• Model: UCI274G - 60Hz 

• Design: 4-pole, drip proof rotating field 

• Exciter Type: Self excited 

• Stator: 2/3 winding pitch 

• Rotor: Single bearing, flexible disc 

• Leads: 12 

• Insulation: Class H 

• Temp Rise @ 40°C Ambient: 125°C Prime 

• Max Over-Speed: 2250 rev/min 

• Voltage Regulator: AS440 

Optional 4-Position VSS (Standard Oversized Alternator kW Rating at 1800rpm/60Hz) 

• 480/277V - 3ph - 0.8pf: 184.8 kW 

• 240/120V - 3ph / 208/120V - 3ph - 0.8pf: 164 kW 

• 240/120V - 1ph - 1pf: 205 kW 

Gen-Set Canopy Dimensions 

• Length: 153.93 in 

• Width: 45.51 in 

• Height: 91.14 in 

• Dry Weight: 7253 lb 

• Fuel Tank Capacity: 224.5 gal 

• Genset Sound Level (dBA@23ft): TBD 

Base-Frame Enclosure 

• Complete gen-set mounted on a heavy duty base frame with an integral double wall fuel tank 

• Anti-vibration isolators installed between engine/alternator supports and the base frame 

• Enclosure parts designed with module principles, without welding 

• Four doors on each side for serviceability, plus a back door for the control system 

• Exhaust silencer coated against environmental conditions, internally mounted within enclosure 

• Exhaust pipe thermally insulated on engine compartment 

• Metal enclosure parts painted with electrostatic polyester powder paint 

• Fuel filling cap within the enclosure, reachable through a lockable door 

• Emergency stop switch externally mounted on enclosure 

• Components installed in sheet steel enclosure 

• Phosphate chemical pre-coating of steel provides corrosion-resistant surface 

• Polyester composite powder topcoat forms a high-gloss, extremely durable finish 

• Lockable hinged panel door provides easy component access 

Control Panel 

• Control Module: DSE 

• Control Module Model: DSE 7320 

• Communication Ports: MODBUS 

• UL recognized, NFPA110 Level 1 compatible 

• LCD text display, key menu navigation and front panel editing 

• Off/Manual/Auto mode switch 

• Two-wire starting/stopping in Auto mode 

• Engine exerciser 

• IP65 front panel rating with supplied sealing gasket 

• Configurable 8 inputs, 6 analogue inputs, 6 DC outputs with expansion capability 

• Real-time clock provides accurate event logging 

• Fully configurable via DSE Configuration Suite PC software (license free) 

• Remote SCADA monitoring and BMS integration features 

Control Unit — Monitored Instruments 

• Engine: speed, oil pressure, coolant temperature, run time/battery volts, maintenance due 

• Mains: voltage (L-L, L-N), frequency, phase sequence 

• Generator: voltage (L-L, L-N), current (L1-L2-L3), frequency, earth current, kW, PF, kVAr, kWh/kVAh/kVArh 

• Pre-Alarms: low oil pressure, high/low engine temperature, over/under speed, under/over generator frequency and voltage, ECU warning 

• Electrical Trip: earth fault, kW overload, generator over current, negative phase sequence 

• Warnings: charge failure, battery under voltage, fail to stop, low fuel level (opt.), kW overload, negative phase sequence, loss of speed signal 

• Shutdowns: fail to start, emergency stop, low oil pressure, high engine temperature, low coolant level, over/under speed, under/over generator frequency and voltage, oil pressure sensor open, phase rotation 

Standard Specifications 

• EPA Certified Tier 4 – Final engine powered generator set for Mobile / Prime applications 

• Designed and manufactured in a facility certified to ISO9001:2015 standards 

• John Deere heavy duty four-cycle industrial diesel engine for low emission, reliable power, and fast load response 

• Non-proprietary control system with total gen-set integrated control, protection, and metering 

• Aksa Power Generation provides single-source responsibility for the generator set and accessories 

• Generator set and components are prototype tested and production tested 

• Stamford industrial generators meet BS EN 60034 and related international standards 

• Heavy duty base frame with integral pad vibration isolators eliminates need for under-unit spring isolators 

Options 

• High oil temperature shut down 

• Low fuel level shut down 

• Low fuel level alarm 

• High fuel level alarm 

• Expansion modules: Additional LED module (2548), Expansion relay module (2157), Expansion input module (2130) 

Standards 

• Electrical Safety / EMC compatibility 

• BS EN 60950 Electrical business equipment 

• BS EN 61000-6-2 EMC immunity standard 

• BS EN 61000-6-4 EMC emission standard 

Convenience Panel Accessories 

• (2) Two 20A, 120V GFCI receptacles and breakers 

• (3) Three 50A, 240V twist lock receptacles and breakers 

• 5-15A, 125V inlet receptacles for battery charger and water heater 

• Two-wire remote start station 

• Generator set voltage adjust rheostat 

• (5) 400A rated, stud type quick connect cam-locks 

• Oil drain valve & extension 

• Convenience panel 

• Voltage selector switch – 3 position 

• Emergency stop switch 

• Battery, battery rack & cables 

• Battery charger (Input: 196-264V, Output: 27.6V 5A or 13.8V 5A) 

• Main line CB 

• Jacket water heater (120 VAC, 1000 W) 

• Operations manual 

• 1 year / 2000 hours limited warranty 

Voltage Selector Switch 

• Three positions at 480/277V, 208/120V - 3ph & 240/120 - 1ph 

• Product of Salzer or Kraus&Naimer 

Standard Features & Accessories 

• Trailer w/spare tire and tool box 

• Sound Attenuated Steel Enclosure 

• Heavy Duty Steel Base-frame 

• Exhaust system with DOC+SCR 

• Flex Fuel Lines 

Trailer 

• DOT approved 10,000 lb heavy duty dual axle trailer 

• Spring axles with electric brakes 

• Breakaway kit with charger 

• 5000 lb front jack and rear stabilizer jacks 

• 7-pin trailer plug 

• Tool box and spare tire 

Circuit Breaker 

• 500 Amp capacity main line circuit breaker 

• Shunt trip controller by generator set control 

Optional Accessories 

• Upsized alternator 

• PMG excitation 

• Alternator anti-condensation heater 

• 4-position VSS 

• Fuel level monitoring on controller & high fuel alarm 

• Fuel line check valve 

• Oil temperature gauge 

• Oil heater 

• Battery charger 10 Amp 

• Battery heater blanket 

• Main line CB (100% rated) 

• Remote monitoring and control 

• Remote annunciator 

Aksa Certificates 

• TS ISO 8528 

• CE 

• SZUTEST 

• 2000/14/EC 

product specifications:

product related documents:

APD-EPAJ140T4.pdf