JD100-01 product details and specifications:

General 

• Model: JD100-01 

• Manufacturer: Blue Star Power Systems 

• Application: Emergency Stationary Standby 

• Power Rating: 100 kWe 

• Frequency: 60 Hz 

• Speed: 1800 RPM 

• Fuel Type: Diesel 

• Unit Color: White (custom colors available) 

• UL 2200 & cUL Listed; CSA Certified 

Engine 

• Manufacturer: John Deere 

• Model: 4045HF285 

• Type: 4-Cycle, Turbocharged, 4-Cylinder Inline 

• Displacement: 275 Cu. In. (4.50 L) 

• Bore x Stroke: 4.19 in. x 5.00 in. 

• Compression Ratio: 19.0:1 

• Max HP Standby: 158 HP (118 kW) 

• Governor: Electronic Isochronous 

• EPA Certification: Tier 3 

• Oil Pump & Filter included 

• Oil Drain Extension plumbed to bulkhead fitting in base 

• Blower Fan & Fan Drive included 

• Starter & Alternator included 

• Flexible Fuel Connector included 

Alternator 

• Manufacturer: Stamford (Nidec) 

• Model (1-Phase 240V): UCI274F, 12 Lead Double Delta 

• Model (3-Phase 208V): UCI274D, 12 Lead Wye 

• Model (3-Phase 240V): UCI274D, 12 Lead Delta 

• Model (3-Phase 480V): UCI274C, 12 Lead Wye 

• Model (3-Phase 600V): UCI274D, 4 Lead Wye 

• Temperature Rise: 125°C over 40°C Ambient 

• Configuration: Brushless Single Bearing 

• Poles: 4 Pole, Rotating Field 

• 100% of Rated Load in One Step 

• Maximum Harmonic Content: 5% 

• Insulation Class: Class H 

• Voltage Regulation: ±1% 

• Compliant: NEMA MG 1, IEEE, and ANSI Standards 

Voltage Regulator 

• Model: Stamford AS440 Automatic Voltage Regulator 

• Type: Half-wave phase controlled thyristor (SMT design) 

• Voltage Regulation: ±1% 

• Thermal Drift: 0.03% per 1°C change in AVR ambient 

• Soft Start Ramp Time: 3 seconds 

• External Voltage Adjustment: ±10% with 1k ohm trimmer 

• AVR Response: 20 ms 

• Over Excitation Protection Set Point: 65VDC 

Control Panel 

• Model: Blue Star DCP7310 Microprocessor-Based Digital 

• Mounted in NEMA 12 Enclosure, facing left from generator end 

• Communications: CAN Bus (J1939) ECU 

• Display: 4-Line back-lit LCD, IP65 rated (with gasket) 

• 8 Programmable Contact Inputs; 10 Contact Outputs 

• RS485 Communicator Interface; USB Connectivity 

• Standard Shutdowns: Low Oil Pressure, High Coolant Temp, Overspeed, Overcrank 

• Emergency Stop Pushbutton; Audible Alarm Buzzer with Silencing Switch 

• NFPA 110 Level 1 Compatible 

• cULus Listed, CE Approved 

• Event Recording (250 events); Windows-Based Software; Multilingual Capability 

Enclosure 

• Level: Level 2 — Weather Proof with Sound Attenuation Foam 

• Material: Powder Coated 14 Gauge Steel 

• Wind Rating: 200 MPH certified per IBC 2021 and ASCE/SEI 7-16 

• Roof: Pitched for increased structural integrity and improved watershed 

• Openings: Punched intake with baffle and punched exhaust 

• Doors: Keyed alike lockable with draw-down latches and stainless steel hinges 

• Sound Foam: 1.5-inch thick Polydamp Type D Acoustical Foam (PAF) 

• Base: Formed steel with mounting and lifting holes 

• Vibration Isolation Mounts included 

Cooling System 

• Type: Unit Mounted Radiator 

• Ambient Capacity: 122°F (50°C) 

• Water Pump Flow Rate: 48.0 GPM 

• Heat Rejection to Coolant: 3,544 BTUM 

• System Coolant Capacity: 5.40 gal 

• Engine Jacket Water Capacity: 2.24 gal 

Exhaust System 

• Silencer: Critical Grade Compact CPJ Series, mounted to engine 

• Exhaust Gas Temperature (Stack): 1,076°F (580°C) 

• Gas Volume at Stack Temp: 805 CFM 

• Maximum Allowable Exhaust Restriction: 30.0 in. H2O 

Fuel System 

• Fuel Tank: 72 Hour / 750 Gallon UL 142 Listed Sub-Base 

• Construction: Double Wall with Secondary Containment Standard 

• Includes: Supply & Return Connections, Fuel Level Gauge, Fuel Leak Switch, Fill & Vent Plumbing 

• Tank Options: 24 Hr (250 gal), 48 Hr (500 gal), 72 Hr (750 gal) 

• Fuel Consumption @ 100% Load: 7.76 gal/hr 

• Fuel Consumption @ 75% Load: 6.25 gal/hr 

• Fuel Consumption @ 50% Load: 4.55 gal/hr 

Electrical System 

• Mainline Breaker: 400 Amp, 2 Pole, 240V, NEMA 1 Enclosure 

• Battery: 12 Volt System with Rack and Cables 

• Battery Charger: BC1206A, 12V, 6 Amp — UL 1236 Listed 

• Jacket Water Heater: 1500W, 120VAC, rated for -20°F, with isolation valves 

Air System 

• Air Cleaner: Dry Single Stage 

• Aspirating Air Flow: 288 CFM 

• Air Flow Required for Radiator-Cooled Unit: 5,829 CFM 

Voltage Configurations 

• 1-Phase: 120/240V, 60 Hz, 1.0 PF — 417 Amps 

• 3-Phase 208V: 60 Hz, 0.8 PF — 347 Amps 

• 3-Phase 240V: 60 Hz, 0.8 PF — 301 Amps 

• 3-Phase 480V: 60 Hz, 0.8 PF — 151 Amps 

• 3-Phase 600V: 60 Hz, 0.8 PF — 120 Amps 

Weights & Dimensions 

• OPU: 90 x 44 x 61 in., 2,750 lbs. 

• Level 1 Enclosure: 102 x 44 x 66 in., 3,350 lbs. 

• Level 2 Enclosure: 102 x 44 x 66 in., 3,400 lbs. 

• Level 3 Enclosure: 132 x 44 x 66 in., 3,575 lbs. 

• 24 Hr Tank: 90.00 x 44.00 x 94.00 in. (L x W x H) 

• 48 Hr Tank: 120.00 x 44.00 x 102.00 in. (L x W x H) 

• 72 Hr Tank: 174.00 x 44.00 x 102.00 in. (L x W x H) 

Sound Data (at 23 ft per ISO 8528-10) 

• OPU: 78 dBA (No Load) / 82 dBA (Full Load) 

• Level 1 Enclosure: 75 dBA (No Load) / 78 dBA (Full Load) 

• Level 2 Enclosure: 72 dBA (No Load) / 74 dBA (Full Load) 

• Level 3 Enclosure: 66 dBA (No Load) / 68 dBA (Full Load) 

Certifications & Compliance 

• UL 2200 & cUL Listed 

• CSA Certified 

• EPA Tier 3 

• Seismic Certified to IBC 2021 

• NFPA 110 Level 1 and Level 2 Compliant 

• CSA C282 Compliant 

Testing & Warranty 

• Factory Test: Standard Commercial Testing — alarm shutdowns, voltage settings, block loading to rated kWe and PF 

• All units tested to cUL, CSA, and NFPA 110 standards 

• Warranty: 2 Year / 2000 Hour Limited Standby Warranty 

product specifications:

product related documents:

2026 EPA Cert 350haj-tjdxl04-5119-005 JD80-02, JD100-01.pdf

JD100-01 Engine Data Sheet 12-5-23.pdf

JD100-01_SpecSheet.pdf

JD100-01_Drawings.pdf

JD100-01.pdf